TACKLIFE MMC01, Money/ Bill Counter, Counterfeit Bill Detection
Three powerful methods to detect counterfeit cash, ripped or damaged bills: UV - ultraviolet, MG - magnetic and IR - infrared
★【LARGE FRONT FACING DISPLAY】
With an easy to read LED screen, the external display gives a double view
★【EFFICIENT & HIGH CAPACITY】
This high speed money counter counts up to 1,000 bills per minute
★【EASY TO USE & MULTIPLE MODES】
Count, add, and batch modes make money counting simple
★【WHAT YOU GET】
1 x MMC01 Bill Counter,
1 x Power cord ,
1 x Brush ,
1 x External display,
1 x Spare parts,
1 x User manual
🏡ABOUT TACKLIFE MONEY COUNTER MMC01/MMC02,
PLEASE BE REMINDED:
This money counter can only count USD bills numbers but not bill denomination;
If you need to count different bill denomination, please don't put them in same counting time, the machine can only calculate numbers of same bills;
Counterfeit/ Broken/ Magnetic stripe of the bills on different sites/ Bill width abnormal will all show error codes on the display, please use the instructions to confirm the exact problem;
If you meet any questions, be free to mail us, we provide all-channels in our user manua
It is recommended to flatten the banknotes when you put them in.
The bills may be jammed if the customers put the wrinkled banknotes in before they are flat enough.
200 Bills Hopper Capacity Satisfy Your Needs Note:
This money counter won't count the total amount of the actual type of bill but it will count the total of bills you are running, which is up to 200. Easy to use, plug-in power, and go. It is fast, accurate, simple, saving you a lot of time. Just what you wanted.
80% of all the operational problems may be caused by the dust and dirt inside the machine, please keep the machine clean all time (E01, E02, E03, E04, E05 error code shown for cleaning dirty needed)
1. MACHINE ONLY COUNTS NUMBER OF BILLS, NO DENOMINATION
2. Kindly recommend to connect the wire again if the screen doesn’t show number
3. The machine must be safely connected with the power source.
4. The machine must be kept in dry and ventilated place to avoid strong sunlight.
5. The machine must be kept far away from the strong magnetic field and the interference of Hertzian waves.
6. The effective power must be in the scope of 110V±10%, otherwise it will affect the normal work.
7. The fuse rating is 2A/250V, it can not be increased or reduced 80% of all the operational problems may be caused by the dust and dirt inside the machine, please keep the machine clean all time.